The production of Charcoal Rods can be divided into four steps.
raw materials are crushed into particles, the drying. made into
charcoal rod, carbonized in the carbonization furnace, cooling, the
final production charcoal.
The production of Charcoal Rods can be divided into four steps:
1. Firstly, the raw materials are crushed into particles by wood
2. Secondly, particles should be drying by wood drier, pay
attention to control moisture.
3. Thirdly, the particles materials made into rod by charcoal rod
4. Finally, charcoal carbonized in the carbonization furnace,
then cooling, is the production charcoal.
Charcoal rods making machine application:
Charcoal rods making machine is the device for the raw
material(such as wood, sawdust, peanut shells, corn, sugarcane
bagasse, cotton stalk, corn stalk, rice husk, sawdust,
miscellaneous branches and so on) cruse into the granular within
10mm. the moisture content of less than 12% after drying, enter the
bar make shape by the high temperature high pressure(do not add any
additives),into the carbonization furnace(self-built kiln ) to
carbonization, is the finished product charcoal.
Introduction of charcoal rods making machine:
Raw material: wood, branches, sawdust, straw, peanut hull, corncob,
boll hull, sunflower hull, coconut shell, etc.
Moisture of raw material: around 12%.
Product shape: long bars in square shape or with hexagonal shape.
Charcoal rods (semifinished product) moisture: 2.1%
Charcoal rods (semifinished product) density: 1.2-1.5g/cm3
Charcoal rods (semifinished product) heat value: 19.79MJ
Dimensions of machine: 1350*850*630mm(L*W*H)